ICECO VL75ProD Straight Fridge Slide - DFG Offroad
$399.99
Built specifically for the ICECO VL75ProD, this low-profile straight fridge slide provides secure and convenient access to your refrigerator while preserving valuable cargo space. Made in the USA from heavy-duty 1/8-inch aluminum with stainless steel hardware, it locks in both the open and closed positions and supports loads up to 350 lb.
ICECO VL75ProD Straight Fridge Slide
Get convenient access to your ICECO VL75ProD without giving up unnecessary cargo space. This DFG Offroad straight fridge slide is designed around the footprint of the VL75ProD, creating a secure, low-profile mounting platform for SUVs, trucks, vans, trailers and overland drawer-system installations.
The frame and refrigerator tray are manufactured from heavy-duty 1/8-inch aluminum for a strong but lightweight construction. Stainless steel hardware helps resist corrosion, while the lock-in and lock-out mechanism keeps the slide securely closed while driving and stable when fully extended.
The tray is sized to support the ICECO VL75ProD while providing room for secure tie-down placement. The slide raises the refrigerator approximately 1 inch above the mounting surface, helping maintain a clean and space-efficient installation.
Built Specifically for the ICECO VL75ProD
Unlike oversized universal refrigerator slides, this model is designed around the footprint of the ICECO VL75ProD.
Its purpose-built dimensions provide a secure fit while helping preserve usable cargo space around the refrigerator. This makes it a practical option for vehicle cargo areas, pickup beds, camper trailers, vans and drawer-system platforms.
The straight-pull configuration allows the refrigerator to extend directly toward the rear or side of the vehicle, depending on the installation orientation.
Key Features
- Designed specifically for the ICECO VL75ProD
- Straight-pull refrigerator slide configuration
- Heavy-duty 1/8-inch aluminum frame
- Heavy-duty 1/8-inch aluminum refrigerator tray
- Stainless steel hardware
- Rated to carry up to 350 lb
- Locks securely in the open position
- Locks securely in the closed position
- Low-profile design
- Raises the refrigerator approximately 1 inch
- Approximately 34-inch slide extension
- Mounting bolts included
- Refrigerator tie-down straps included
- Lightweight, corrosion-resistant construction
- Designed and manufactured by DFG Offroad
- Made in Jacksonville, Florida, USA
- Covered by a 2-year DFG Offroad warranty
Secure Locking System
The slide locks securely in both the fully closed and fully extended positions.
The closed-position lock helps prevent movement while driving on the highway or traveling over rough terrain. When fully extended, the open-position lock keeps the refrigerator stable while loading food, accessing either compartment or adjusting the controls.
Always confirm that the locking mechanism is completely engaged before driving.
Low-Profile Construction
The low-profile design raises the refrigerator tray approximately 1 inch above the mounting surface while maintaining an overall slide height of approximately 2 inches.
This helps preserve vertical clearance inside SUVs, truck beds, trailers and drawer-system installations.
Before ordering, confirm that your installation has enough vertical clearance for the refrigerator, slide and refrigerator lids.
Heavy-Duty Aluminum Construction
The frame and tray are manufactured from 1/8-inch aluminum to provide strength without the unnecessary weight associated with many steel refrigerator slides.
Aluminum construction also provides excellent corrosion resistance for off-road, camping and overland environments.
Stainless steel hardware is used throughout the assembly for additional durability and corrosion resistance.
Dual-Zone Refrigerator Access
The ICECO VL75ProD features two independently controlled storage zones and separate lids.
When planning the installation, make sure there is enough space above the refrigerator for both lids to open completely. Also check for interference from rear doors, tailgates, camper-shell windows, drawer-system tops, cargo barriers and overhead storage.
The slide must extend far enough for the refrigerator lids to clear the vehicle opening or surrounding platform.
Included with the Slide
- DFG Offroad straight refrigerator slide
- ICECO VL75ProD-sized aluminum tray
- Locking heavy-duty drawer slides
- Stainless steel assembly hardware
- Vehicle/platform mounting bolts
- Refrigerator tie-down straps
- Installation guidance
The ICECO refrigerator is not included.
DFG1654
Specific References
- MPN
- DFG1654
New
Specs
Overall Dimensions
L:37 1/4" x W:21" x H:2"
Tray Dimensions
L:35 1/2" x W:19"
Height
2"
Weight
28 lbs
Weight Capacity
350 lbs
Material
Aluminum / Stainless steel
Vehicle Fitment
Many trucks & SUVs
Warranty
2 Years Warranty
Raised Height
1" from mounting surface
Slide Type
Straight
Slide Extension
36 in
Locking Positions
Open / Closed
Frame Material
1/8 in aluminum
Tray Material
1/8 in aluminum
Hardware
Stainless steel
Mounting Kit
Included
Tie-Down Straps
Included
Country of Manufacture
Made in USA
Fridge Included
No
Compatibility
- ICECO VL75ProD
- ICECO VL75 Pro Dual Zone
- ICECO VL75Pro Dual-Zone 75L
- ICECO VL75ProD 79QT
- This slide is not automatically compatible with the ICECO VL75, VL75ProS, VL90ProD or other similarly named models. Confirm the exact refrigerator model before ordering.
Install Notes: - Install the slide on a flat, level and structurally secure mounting surface.
- Depending on the vehicle or platform, installation may use through-bolts, rivet nuts or other application-specific mounting hardware.
- For pickup beds with corrugated floors, spacers or a level mounting platform may be required to prevent the slide frame from twisting when the mounting bolts are tightened.
- Do not install the slide directly over unsupported carpet, plastic trim or thin sheet metal without adequate reinforcement.
- Confirm that there is approximately 36 inches of unobstructed space in front of the slide for full extension.
Check that the slide and refrigerator will clear:
Rear doors
Tailgates
Hatch openings
Drawer-system wings
Cargo barriers
Camper-shell openings
Interior trim
Rear seats
Electrical wiring
Refrigerator power cables
Both refrigerator lids
Position the refrigerator so its ventilation openings are not blocked.
Make sure the power cable has enough slack to move with the refrigerator without becoming stretched, pinched or caught in the slide.
Secure the refrigerator to the tray using the included tie-down straps before operating the vehicle.
Verify that the slide locks completely in the closed position before driving.
Periodically inspect all mounting bolts, straps and locking components, especially after off-road travel.
- Depending on the vehicle or platform, installation may use through-bolts, rivet nuts or other application-specific mounting hardware.
- For pickup beds with corrugated floors, spacers or a level mounting platform may be required to prevent the slide frame from twisting when the mounting bolts are tightened.
- Do not install the slide directly over unsupported carpet, plastic trim or thin sheet metal without adequate reinforcement.
- Confirm that there is approximately 36 inches of unobstructed space in front of the slide for full extension.
Check that the slide and refrigerator will clear:
Rear doors
Tailgates
Hatch openings
Drawer-system wings
Cargo barriers
Camper-shell openings
Interior trim
Rear seats
Electrical wiring
Refrigerator power cables
Both refrigerator lids
Position the refrigerator so its ventilation openings are not blocked.
Make sure the power cable has enough slack to move with the refrigerator without becoming stretched, pinched or caught in the slide.
Secure the refrigerator to the tray using the included tie-down straps before operating the vehicle.
Verify that the slide locks completely in the closed position before driving.
Periodically inspect all mounting bolts, straps and locking components, especially after off-road travel.
Real DFG Offroad feedback
No reviews yet. Be the first to review this product.
Please sign in to write a review.
Why It Stands Out
DFG Offroad products are built with a focus on durability, clean installs, and dependable use for overland rigs, work vehicles, and weekend builds.
Fitment & Installation Notes
Please verify your vehicle, fridge model, mounting surface, and available space before ordering. For custom setups, through-bolts or rivet nuts may be recommended depending on the application.
Shipping & Lead Time
Orders are prepared as quickly as possible and tracking will be sent once the shipment is on the way. Transit time depends on destination and carrier.
Need help before ordering?
Contact us if you want help confirming fitment or choosing the right option for your build.
Built specifically for the ICECO VL75ProD, this low-profile straight fridge slide provides secure and convenient access to your refrigerator while preserving valuable cargo space. Made in the USA from heavy-duty 1/8-inch aluminum with stainless steel hardware, it locks in both the open and closed positions and supports loads up to 350 lb.