ICECO VL60 / VL65 / VL74 Dual Zone Straight Fridge Slide
$389.99
Built specifically for the ICECO VL60, VL65 and VL74 Dual Zone refrigerators, this heavy-duty straight fridge slide provides secure access while preserving cargo space. It is manufactured from 1/8-inch aluminum, uses stainless steel hardware and locks in both the open and closed positions.
ICECO VL60 / VL65 / VL74 Dual Zone Straight Fridge Slide
Securely mount and access your ICECO VL60, VL65 or VL74 Dual Zone refrigerator with a fridge slide designed around its footprint. This DFG Offroad straight slide provides a strong, low-profile mounting platform for overland vehicles, trucks, SUVs, vans, trailers and drawer-system installations.
The frame and refrigerator tray are manufactured from 1/8-inch aluminum for a durable but relatively lightweight construction. Stainless steel hardware provides corrosion resistance, while the lock-in and lock-out mechanism keeps the slide secured during travel and stable when fully extended.
Built for ICECO Dual Zone Fridges
This model is designed to fit the ICECO VL60, VL65 and VL74 Dual Zone refrigerators. Unlike oversized universal slides, its tray is sized for these models to provide a secure fit without using more cargo space than necessary.
Before ordering, confirm whether your refrigerator is the Dual Zone version. ICECO VL45 and VL60 Single Zone refrigerators use a different slide.
Key Features
- Fits ICECO VL60, VL65 and VL74 Dual Zone refrigerators
- Straight slide configuration
- 1/8-inch aluminum frame and tray
- Stainless steel hardware
- Rated to carry up to 350 lb
- Locks in the open and closed positions
- Low-profile construction
- Approximately 30-inch slide extension
- Mounting bolt kit included
- Fridge tie-down straps included
- Made in the USA
- Covered by a 2-year DFG Offroad warranty
What Is Included
- ICECO VL60 / VL65 / VL74 Dual Zone straight fridge slide
- Mounting bolt kit
- Fridge tie-down straps
ICECO refrigerator is not included.
Other Available Configurations
This refrigerator fitment is also available in:
- Side Access Fridge Slide
- Tilt Fridge Slide
- Fridge Slide with Cutting Board
Choose the configuration that works best with your cargo layout, available rear clearance and refrigerator mounting height.
DFG1353
Specific References
- MPN
- DFG1353
New
Specs
Overall Dimensions
L:34 1/4" x W:21 1/2" x H:2"
Tray Dimensions
L:32 1/2" x W:20"
Height
2"
Weight
23 lbs
Weight Capacity
350 lbs
Material
Aluminum / Stainless steel
Vehicle Fitment
Many trucks & SUVs
Warranty
2 Years Warranty
Raised Height
1" from mounting surface
Slide Type
Straight
Slide Extension
32 in
Locking Positions
Open and closed
Frame Material
1/8 in aluminum
Tray Material
1/8 in aluminum
Hardware
Stainless steel
Mounting Kit
Included
Tie-Down Straps
Included
Country of Manufacture
Made in USA
Fridge Included
No
Compatibility
- ICECO VL60, VL65 and VL74 Dual Zone
Install Notes: Install the fridge slide on a flat, structurally secure mounting surface. Depending on the vehicle or cargo platform, installation may require through-bolts, rivet nuts or other suitable mounting hardware.
Confirm that the installation area provides enough room for the slide’s external dimensions and approximately 32 inches of extension. You should also check vertical clearance for opening both refrigerator lids.
Before ordering, verify the exact refrigerator model and compare its footprint with the tray dimensions. Contact DFG Offroad for assistance with drawer systems, custom platforms or vehicle-specific installations.
Confirm that the installation area provides enough room for the slide’s external dimensions and approximately 32 inches of extension. You should also check vertical clearance for opening both refrigerator lids.
Before ordering, verify the exact refrigerator model and compare its footprint with the tray dimensions. Contact DFG Offroad for assistance with drawer systems, custom platforms or vehicle-specific installations.
Real DFG Offroad feedback
No reviews yet. Be the first to review this product.
Please sign in to write a review.
Why It Stands Out
DFG Offroad products are built with a focus on durability, clean installs, and dependable use for overland rigs, work vehicles, and weekend builds.
Fitment & Installation Notes
Please verify your vehicle, fridge model, mounting surface, and available space before ordering. For custom setups, through-bolts or rivet nuts may be recommended depending on the application.
Shipping & Lead Time
Orders are prepared as quickly as possible and tracking will be sent once the shipment is on the way. Transit time depends on destination and carrier.
Need help before ordering?
Contact us if you want help confirming fitment or choosing the right option for your build.
Built specifically for the ICECO VL60, VL65 and VL74 Dual Zone refrigerators, this heavy-duty straight fridge slide provides secure access while preserving cargo space. It is manufactured from 1/8-inch aluminum, uses stainless steel hardware and locks in both the open and closed positions.