BougeRV Rocky V3.0 41QT / 55QT Straight Fridge Slide - DFG Offroad
$389.99
The DFG Offroad Straight Fridge Slide for the BougeRV Rocky V3.0 41QT and 55QT delivers smooth pull-out functionality, secure mounting, and premium durability for overland, camping, and expedition vehicle setups. Both fridge sizes use the same slide footprint.
Upgrade your overland setup with the DFG Offroad Straight Fridge Slide designed specifically for the BougeRV Rocky V3.0 41QT and 55QT portable refrigerators.
Built for expedition travel, camping, and off-road use, this premium pull-out fridge slide provides fast and convenient fridge access while maximizing cargo organization and usability inside your vehicle build.
Constructed from heavy-duty aluminum and paired with stainless steel hardware, the DFG Straight Fridge Slide is engineered to withstand rough terrain, vibration, moisture, and long-term outdoor use while maintaining a lightweight and durable design.
The low-profile construction minimizes added height while maintaining excellent structural rigidity and smooth slide operation during travel.
Designed around the footprint shared by the BougeRV Rocky V3.0 41QT and 55QT models, this fridge slide delivers secure mounting and stable support for SUVs, trucks, vans, campers, trailers, and custom drawer system installations. The 41QT and 55QT models have identical base dimensions, allowing one slide to fit both sizes.
Perfect for overland travelers, van life builds, camping rigs, and off-road vehicles looking for a premium fridge access solution.
Straps and mounting hardware are included for a complete installation solution right out of the box.
Key Features
- Designed specifically for the BougeRV Rocky V3.0 41QT & 55QT
- Fits both 41QT and 55QT models
- Straight pull-out fridge slide design
- Heavy-duty aluminum tray and frame
- Stainless steel hardware included
- Smooth heavy-duty drawer slides
- Low-profile design minimizes added height
- Lightweight yet extremely durable
- Secure mounting for off-road and overland use
- Compatible with drawer systems and custom cargo builds
- Perfect for SUVs, trucks, campers, vans, and trailers
- Straps and mounting hardware included
DFG1023
Specific References
- MPN
- DFG1023
New
Specs
Overall Dimensions
L:30 3/4" x W:19 1/2" x H:2"
Tray Dimensions
L:29" x W:18"
Height
2"
Weight
28 lbs
Weight Capacity
250 lbs
Material
Aluminum / Stainless steel
Vehicle Fitment
Many trucks & SUVs
Warranty
2 Years Warranty
Raised Height
1" from mounting surface
Slide Type
Straight
Slide Extension
30 in
Locking Positions
Open / Closed
Frame Material
1/8 in aluminum
Tray Material
1/8 in aluminum
Hardware
Stainless steel
Mounting Kit
Included
Tie-Down Straps
Included
Country of Manufacture
Made in USA
Fridge Included
No
Install Notes: - Install the slide on a flat, level and structurally secure mounting surface.
- Depending on the vehicle or platform, installation may use through-bolts, rivet nuts or other application-specific mounting hardware.
- For pickup beds with corrugated floors, spacers or a level mounting platform may be required to prevent the slide frame from twisting when the mounting bolts are tightened.
- Do not install the slide directly over unsupported carpet, plastic trim or thin sheet metal without adequate reinforcement.
- Confirm that there is approximately 36 inches of unobstructed space in front of the slide for full extension.
Check that the slide and refrigerator will clear:
Rear doors
Tailgates
Hatch openings
Drawer-system wings
Cargo barriers
Camper-shell openings
Interior trim
Rear seats
Electrical wiring
Refrigerator power cables
Both refrigerator lids
Position the refrigerator so its ventilation openings are not blocked.
Make sure the power cable has enough slack to move with the refrigerator without becoming stretched, pinched or caught in the slide.
Secure the refrigerator to the tray using the included tie-down straps before operating the vehicle.
Verify that the slide locks completely in the closed position before driving.
Periodically inspect all mounting bolts, straps and locking components, especially after off-road travel.
- Depending on the vehicle or platform, installation may use through-bolts, rivet nuts or other application-specific mounting hardware.
- For pickup beds with corrugated floors, spacers or a level mounting platform may be required to prevent the slide frame from twisting when the mounting bolts are tightened.
- Do not install the slide directly over unsupported carpet, plastic trim or thin sheet metal without adequate reinforcement.
- Confirm that there is approximately 36 inches of unobstructed space in front of the slide for full extension.
Check that the slide and refrigerator will clear:
Rear doors
Tailgates
Hatch openings
Drawer-system wings
Cargo barriers
Camper-shell openings
Interior trim
Rear seats
Electrical wiring
Refrigerator power cables
Both refrigerator lids
Position the refrigerator so its ventilation openings are not blocked.
Make sure the power cable has enough slack to move with the refrigerator without becoming stretched, pinched or caught in the slide.
Secure the refrigerator to the tray using the included tie-down straps before operating the vehicle.
Verify that the slide locks completely in the closed position before driving.
Periodically inspect all mounting bolts, straps and locking components, especially after off-road travel.
Real DFG Offroad feedback
No reviews yet. Be the first to review this product.
Please sign in to write a review.
Why It Stands Out
DFG Offroad products are built with a focus on durability, clean installs, and dependable use for overland rigs, work vehicles, and weekend builds.
Fitment & Installation Notes
Please verify your vehicle, fridge model, mounting surface, and available space before ordering. For custom setups, through-bolts or rivet nuts may be recommended depending on the application.
Shipping & Lead Time
Orders are prepared as quickly as possible and tracking will be sent once the shipment is on the way. Transit time depends on destination and carrier.
Need help before ordering?
Contact us if you want help confirming fitment or choosing the right option for your build.
The DFG Offroad Straight Fridge Slide for the BougeRV Rocky V3.0 41QT and 55QT delivers smooth pull-out functionality, secure mounting, and premium durability for overland, camping, and expedition vehicle setups. Both fridge sizes use the same slide footprint.